Casing Cutters

Water Well and Hole Drilling Supplies
Drill Tools MADE IN THE U.S.A.!

Introducing a Simple Solution to Cutting Casing

The Holte Casing Cutter is designed for cutting steel pipe above or below ground. The simply designed body allows the 6” or 16” unit to be quickly threaded onto your drill string through the use of standard connections.  Once the unit is lowered to the desired depth air pressure is applied while the unit is rotating.  The single, round cutting blade makes the cut before air pressure builds up to 150 – 200PSI.

Holte Gives Coverage

Holte Casing Cutters are available in two different body sizes with simple bolt on adapters to allow flexibly in usage.

Standard units are designed to cut up to 0.375” wall pipe.

Parts Designed to Last

The outer housing is made of heavy gauge steel while the internal parts are machined and carbon treated to withstand the high stresses experienced during usage and reduce wear in areas of high friction.

Blade replacement is simple and blades are interchangeable with adapters.

6″ Casing Cutter capable of cutting up to 14″ pipe (6″ without adapter or standard adapters at 8″, 10″, 12″, and 14″).

16″ Casing Cutter capable of cutting up to 30″ pipe (16″ without adapter or standard adapters at 18″, 20″, 22″, 24″, 26″, 28″, and30″).

Holte Casing Cutters

6 ” Casing Cutter Assembly | Sizes & Part Numbers

6" Casing Cutter 
DescriptionPart #
6" Casing Cutter Assembly270006
Top Pin Connector (Back Head)100744
Piston Seal (4" x 4 3/8" x 1/4" Garlock Seal)100746
Cylinder Top Barrel100747
Main Center Body100748
Roller Ball retainer Bolt100749
3/4" Steel Roller Ball (standard) 4/set100750
1" Steel Roller Ball (Standard) 4/set100751
2" Steel Roller Ball100752
Cutter Blade 54mm100753
Cutter Blade 50mm100754
Cutter Blade Retaining Bolt100755
HD 4" Cutter Blade for 1/2" wall100756
Cutter Blade Retaining Bolt100757
Spring Can Bottom Barrel100758
Vertical Slide100759
Locking Nut for Stroke Adjustment100760
Stroke Adjustment Bolt/Stop Bolt- 3/4 x 7 1/2 (6 1/2 from End of Slide)100761
Main Spring (Regular of Heavy Duty)100762
Bottom Cap100763
6" Blade Holder Cross Slide100765
8" Blade Holder Cross Slide100766
10" Blade Holder Cross Slide100767
12" Blade Holder Cross Slide100768
14" Blade Holder Cross Slide100764
Custom 12"Adapter Blade Holder Cross Slide w/ Bulged End for 4" Blade(1/2"wall blade)100769
8" Adapter Barrel w/ Cross Slide Blade Holder100770
10" Adapter Barrel w/ Cross Slide Blade Holder100771
12" Adapter Barrel w/ Cross Slide Blade Holder100772
12" Adapter Barrel w/ Custom Cross Slide & Extra Rollers for 1/2" Wall Pipe100773
14" Adapter Barrel w/ Cross Slide Blade Holder100774
16" Casing Cutter 
DescriptionPart #:
16" Casing Cutter Assembly270016
Top Pin Connector (Back Head) 4 1/2100775
Cylinder Top Barrel (Air Cylinder Tube)100776
Polymite Piston Seal100777
Wear Band (2 required) priced per set100778
Vertical Slide100779
Main Center Body100780
Cutter Blade100782
Cutter Blade Retaining Bolt100783
Spring Can Bottom Barrel (2 piece - price for pair)100784
Main Spring (Regular of Heavy Duty)100785
Spring Connector100786
Locking Nut for Stroke Adjustment100787
Stroke Adjustment Bolt (Rod)100788
Bottom Cap100789
1 1/2" Steel Roller Ball (18Req.) priced per set100791
Roller Ball Retainer (18 Req.) priced per set100792
18" Adapter Guide with Cross Slide100794
20" Adapter Guide with Cross Slide100795
22" Adapter Barrel with Cross Slide100796
24" Adapter Barrel with Cross Slide100797
26" Adapter Barrel with Cross Slide100798
28" Adapter Barrel with Cross Slide100799
30" Adapter Barrel with Cross Slide100800
16" Blade Holder Cross Slide100801
18" Blade Holder Cross Slide100802
20" Blade Holder/Cross Slide100790
22" Blade Holder Cross Slide100803
24" Blade Holder Cross Slide100804
26" Blade Holder Cross Slide100805
28" Blade Holder Cross Slide100806
30" Blade Holder Cross Slide100807
Bolt Push Down Ring Outer Pipe/Sleeve 9 3/4" OD101138
Top Pin Connector Bolt Push Down Ring 10 3/8" OD101139
Large Casing Cutter Adapter Roller101207
Large Casing Cutter Adapter Roller Axle Pin101208

Over 45 years has led to ingrained expertise with Casing tools: Casing Cutters, Casing Drivers, Casing Perforators, and Extractor Hammers. Our founder, Art Holte, was a well driller and remains one of the most gifted innovators and experts in the field. Art’s emphasis on high quality, durable, and fast working tooling, have pervaded the company. We grow with the needs of the industry—not shareholders. Our sales and design teams have literally machined, assembled, and used Drivers, Cutters, Perforators, and Extractors.  Holte Customers have tools they’ve been using for over 40 years!  Our offices are still on the manufacturing floor where we can hear the sweet sounds of CNCs and testing tools; where machinists, sales, and designers can interact to make sure our tools lead the industry.